Retentions
See below for more informations

What we do
- For barrels and containers
- Platforms
- Accessories
Regulations on the storage of hazardous products
For the storage of the polluting and dangerous products the regulations are strict.
Chapitre II: Accident prevention and accidental pollutions, including by rainwaters:
Article 10
Any storage of a liquid susceptible to create a water pollution or grounds must be associated with a capacity of retention the volume of which must be equal to the biggest of following both values:
100 % of the capacity of the biggest reservoir
50 % of the capacity of the associated reservoirs.
This is not applicable to the residual ponds of water treatment.
For the storage lower or equal to 250 liters, the capacity of retention must be equal at least in:
– In the case of flammable liquids, with the exception of lubricants, 50 % of the total capacity of barrels.
– In other cases, 20 % of the total capacity of barrels.
– In other cases 800 liters minimum or equal in the total capacity when this one is lower than 800 liters.
The capacity of retention must be tight in the products which it could contain and resist the physical and chemical action of the fluids. It’s the same for its device of closing which must be maintained closed.
The waterproofness of associated tank(s) must be able to be checked at any time.
Incompatible products are not associated to the same retention.
For barrels and containers

Get a quote :
+33(0)4 42 12 51 72
Retentions 1000 to 1500 liters
RET-CO1000
RET-CO1200
RET-CO1500
1000l:
Dimensions: L=1650 x W=1450 x H =600mm
Weight: 150kg
Can accept:
2500 kg as standard
1200l:
Dimensions: L=1290 x W=1290 x H =900mm
Weight: 90kg
Can accept:2500 kg as standard
1500l:
Dimensions: L=1290 x W=1290 x H =900mm
Weight: 90kg
Can accept:2500 kg as standard
Material
Handled high-density polyethylene HDPE. Anti-UV
Rotomoulding monoblock
Duck-boards removable anti-corrosion for cleaning (steel galvanized on request)
Opening of pumping in duck-boards (100x100mm)
Handling:
pallet truck
Empilable
Retention Container 1050 liters
Modèle RET-CO1050
Dimensions: L=2490 x W=1290 x H =435 mm
Weight: 90kg
Can accept: 2500 kg as standard
Material
Handled high-density polyethylene HDPE. Anti-UV
Rotomoulding monoblock
Duck-boards removable anti-corrosion for cleaning (steel galvanized on request)
Opening of pumping in duck-boards (100x100mm)
Handling:
pallet truck
Empilable


Retentions for barrels 70 to 880 liters
RET-FU 070: for small barrels
RET-FU 220: for 2 barrels of 220l.
Capacity: 220l
Dimensions: 1265 x 705 x 540
Weight: 24 kg. Can support: 550 kg
RET-FU 270: for 2 barrels of 220l.
Capacity: 220l
Dimensions: 1250 x 1250 x 240
Weight: 65 kg. Can support: 1100 kg
RET-FU 450C: for 4 barrels of 220l.
Capacity: 450l
Dimensions: 1250 x 1250 x 475
Weight: 65 kg. Can support: 1100 kg
RET-FU 450L: for 4 barrels of 220l.
Capacity: 450l
Dimensions: 2410 x 693 x 330
Weight: 55 kg. Can support: 1100 kg
RET-FU 880: for 4 barrels of 220l.
Capacity: 880l
Dimensions: 1290 x 1290 x 705
Weight: 100 kg. Can support: 1500 kg
Retention / cabinet
Model RET-AR1000
Technical characteristics:
Capacity: 1000l
Dimensions: 1500 x 1500 x 2210mm
Weight: 230kg
Can support: 2500kg
Material:
Handled high-density polyethylene HDPE
Anti-UV
Rotomoulding monoblock
Duck-boards removable anti-corrosion for cleaning (steel galvanized on request)
Opening in duck-boards (100x100mm)
Handling:
pallet truck
Empilable


Platforms
- 35 liters
- 60 liters
- 120 liters

Get a quote :
+33(0)4 42 12 51 72
Retention / platform 35 liters
Model RET-PF035
Capacity : 35 liters
Dimension : 710 x 665 x 115mm
Weigh : 39 kg
Can accept: 1000 KG
Material
Handled high-density polyethylene HDPE
Anti-UV
Rotomoulding monoblock
Duck-boards removable anti-corrosion for cleaning (steel galvanized on request)
Opening in duck-boards (100x100mm)
Handling:
pallet truck
Empilable
Retention platform 60 liters
Modèle RET-PF060
Capacity : 60 liters
Dimension : 1230 x 620 x 115mm
Weigh : 39kg
Can accept: 1000 KG
Material
Handled high-density polyethylene HDPE
Anti-UV
Rotomoulding monoblock
Duck-boards removable anti-corrosion for cleaning (steel galvanized on request)
Opening in duck-boards (100x100mm)


Retention platform 120 liters
Modèle RET-PF120
Capacity : 120 liters
Dimension : 1230 x1230 x 115mm
Weigh : 39kg
Can accept: 1000 KG
Material
Handled high-density polyethylene HDPE
Anti-UV
Rotomoulding monoblock
Duck-boards removable anti-corrosion for cleaning (steel galvanized on request)
Opening in duck-boards (100x100mm)
Accessories

Get a quote :
+33(0)4 42 12 51 72
Box for sand/ salt – 180 Liters
Modèle RET-COF180
Capacity : 180 liters
Dimension : 1030 x 630 x 690mm
Weight : 15kg
Material
Handled high-density polyethylene HDPE
Anti-UV
Rotomoulding monoblock

Box for sand/ salt – 300 Liters
Modèle RET-COF300
Capacity : 300 liters
Dimension : 1255 x 750 x 850 mm
Weight : 21 kg
Material
Handled high-density polyethylene HDPE
Anti-UV
Rotomoulding monoblock
Reversible support for barrel
Modèle RET-SUP60/220
For 60 or 220 liters
Dimension :4950 x 495 x 390mm
Weight : 8.4kg
Material
High-density polyethylene HDPE
Anti-UV
Rotomoulding monoblock

Support for 2 barrels of 220 liters
Model RET-SUP02
Dimension : 1245 x 580 x 380mm
Weight :20kg
Material
High-density polyethylene HDPE
Anti-UV
Rotomoulding monoblock
Can for dripping of the valves
Model RET-POT01
Dimension : 630 x 575 x H sup=405 H=470
Capacity: 50 liters
Diameter: 500mm
Weight : 5.3kg
Material
High-density polyethylene HDPE
Anti-UV
Rotomoulding monoblock

Access Ramp
Model RET-ACC01
Dimension : 775 x 580 x 115mm
Weight :7kg
Material
High-density polyethylene HDPE
Anti-UV
Rotomoulding monoblock
